Vietnam Art Journal
Gallery Wall Layout Ideas for Landscape Prints
Plan a gallery wall as one group. Measure from the outside edges of the frames, including the gaps. A pair works on a narrower wall, a trio needs more width, and a mixed cluster adds height without taking up as much space.
By AE&Adamas Store · Published

The examples below use a 3-inch gap and a 30 × 22-inch outer frame around each 28 × 20 inch landscape print. Your frame and mat may produce different outside dimensions, so replace the example numbers with your own before marking the wall.
Measure the whole group
Treat every frame and every gap as one large rectangle. Framebridge's gallery-wall guide recommends thinking of a gallery wall as a single artwork, testing the layout on a table or floor and keeping gaps of 2 to 3 inches consistent.
Measure the empty wall and note furniture, trim, outlets and switches. Then calculate the arrangement's full width and height from the outside edges of its frames. This tells you whether the layout fits before any holes are made.
Layout 1: a balanced pair for a sofa or console
Two 30 × 22 inch frames placed side by side with a 3-inch gap form a 63 × 22 inch group:
- Total width: 30 + 3 + 30 = 63 inches
- Total height: 22 inches
- If centered at 57 inches on a clear wall: bottom 46 inches, top 68 inches
A pair gives two related views equal space. Align the top and bottom edges, then sequence the images by visual movement. A river or bridge that leads right can point toward the second frame rather than out of the arrangement.

Layout 2: a horizontal trio for a wide wall
Three matching frames with two 3-inch gaps form a 96 × 22 inch group:
- Total width: 30 + 3 + 30 + 3 + 30 = 96 inches
- Total height: 22 inches
This is a wide installation. It extends past the 72-inch sofa used in our wall-art hanging-height guide by 12 inches on each side when centered. Reserve it for a genuinely wide wall or a longer piece of furniture, and confirm clearances before committing.
Use the strongest or most detailed landscape in the center. Place quieter images on the sides, or arrange three scenes so color and horizon lines create a deliberate left-to-right rhythm.

Layout 3: a compact mixed cluster
Use one 30 × 22 inch landscape beside two 15 × 15 inch square frames stacked vertically. With a 3-inch gap between columns and a 3-inch gap between the squares, the group measures 48 × 33 inches:
- Total width: 30 + 3 + 15 = 48 inches
- Total height: 15 + 3 + 15 = 33 inches
- If centered at 57 inches: bottom 40.5 inches, top 73.5 inches
The large landscape acts as the anchor. The two smaller frames can hold details, maps, photographs or related art. Center the 22-inch-tall landscape vertically within the 33-inch group, leaving 5.5 inches above and below it.
Test the complete layout on paper
Trace each outer frame onto kraft paper, cut out the templates and label them. Arrange the paper pieces on the floor first, then tape them to the wall with removable painter's tape. Check the composition from the room entrance and from the seat used most often.
Mark the actual hanging point for each frame only after the paper layout feels settled. The hook location depends on the hardware, wire tension and frame, so it cannot be inferred from frame height alone. Confirm hardware and anchor ratings for the finished framed weight and wall construction.
Build the arrangement around a place
The AE&Adamas Vietnamese landscape wall art collection includes Tràng An, Hà Giang and the Golden Bridge. Each is a physical 28 × 20 inch matte-paper print sold unframed. Compare the three scenes, then choose frames and a layout for your wall. Etsy provides current price, options and delivery details for each design.
Sources
- How to Hang a Personalized, One-of-a-Kind Gallery Wall — Framebridge
These references support the article. They do not describe how AE&Adamas products are made; product facts come from the dated Etsy catalog check.


